Apple in October 2024 overhauled its 14-inch and 16-inch MacBook Pro models, adding M4, M4 Pro, and M4 Max chips, Thunderbolt 5 ports on higher-end models, display changes, and more. That’s quite a lot of updates in one go, but there is another major refresh coming to the MacBook Pro – although when it will arrive has now been thrown into doubt.
According to Bloomberg‘s Mark Gurman, Apple is rethinking its original plan to refresh the MacBook Pro lineup with M5 chips later this year. Instead, the refreshed models are now expected to arrive in the first half of 2026.
Gurman previously suggested that a more substantial redesign or “true overhaul” was scheduled for 2026. But now that the M5 refresh itself appears to be delayed until 2026, the chances of a major redesign landing in the same year seem less likely. Gurman has so far kept quiet on whether the redesign timeline has shifted as well.
To recap, here are the biggest changes rumored to be coming to the overhauled MacBook Pro, following the M5 refresh early next year.
OLED Display
Goodbye, mini-LED
Several rumors have indicated that Apple is developing MacBook Pro models with OLED displays. Research firm Omdia in May 2024 claimed Apple is “highly likely” to introduce new MacBook Pros featuring OLED displays next year, while display analyst Ross Young in September 2024 said that Apple’s supply chain is expected to have sufficient notebook-optimized OLED display production capacity in 2026 to bring the technology to MacBook Pro. Compared to current MacBook Pro models that use mini-LED screens, the benefits of OLED technology would include increased brightness, higher contrast ratio with deeper blacks, improved power efficiency for longer battery life, and more.
Thinner, Lighter Laptop
Major Redesign
The switch to OLED displays could allow future MacBook Pro models to have a thinner design, and rumors suggest that is indeed what Apple intends. When the M4 iPad Pro was unveiled in May 2024, Apple touted it as the company’s thinnest product ever. Bloomberg‘s Mark Gurman subsequently called the iPad Pro the “beginning of a new class of Apple devices,” and said Apple was working to make the MacBook Pro thinner over the “next couple of years.” Apple is reportedly focusing on delivering the thinnest possible device without compromising on battery life or major new features.
Notably, the MacBook Pro got thicker and heavier with its most recent redesign in 2021. A major highlight was the reintroduction of several ports that were removed in previous iterations in favor of chassis thinness. How Apple will make its redesigned MacBook Pro thinner without removing the functionality it reintroduced fairly recently is the big question.
Punch-Hole Camera
No More Notch
If you are fed up of the notch intruding on your Mac display, here’s some good news. Apple plans to remove the notch from the redesigned MacBook Pro, according to a roadmap shared by research firm Omdia. The roadmap indicates that redesigned 14-inch and 16-inch MacBook Pro models will have a hole-punch camera at the top of the display, rather than the notch we’ve become accustomed to. A MacBook Pro without a notch would offer additional visible pixels on the screen, creating a more uninterrupted and cohesive display design.
5G Modem
Cellular Connectivity
In 2025, Apple introduced the C1 modem, its custom-built 5G chip that it’s had in the works for years now. The modem chip features in the iPhone 16e and is said to be coming in the iPhone 17 “Air,” giving Apple an opportunity to test the technology before rolling it out to flagship devices. According to Bloomberg‘s Mark Gurman, Apple will then consider bringing cellular connectivity to the Mac lineup for the first time. The company is said to be “investigating” the possibility of adding a second-generation C2 modem chip to a future Mac as soon as 2026, teasing the potential for a cellular MacBook Pro in the same year. The C1 modem chip is limited to sub-6GHz 5G speeds, but the second-generation version will support faster mmWave technology, according to Gurman.
M6 Series Chip
2nm Process
Before the MacBook Pro’s major redesign, Apple plans to update the lineup with M5 series chips. The chips will be manufactured with TSMC’s third-generation 3nm process, known as N3P, resulting in typical year-over-year performance and power efficiency improvements compared to the M4 series of chips. M6 chips, on the other hand, could adopt a completely new packaging process for Apple’s overhauled MacBook Pro models.
According to one rumor, Apple’s A20 chip in next year’s iPhone 18 models will switch from the previous InFo (Integrated Fan-Out) packaging to WMCM (Wafer-Level Multi-Chip Module) packaging. WMCM integrates multiple chips within the same package, allowing for the development of more complex chipsets. Components such as the CPU, GPUs, DRAM, and Neural Engine would therefore be more tightly integrated. While we don’t know for sure, this could see Apple develop the M6 using the 2nm process while taking advantage of WMCM packaging to make even more powerful versions of its custom processor.
This article, “OLED MacBook Pro May Not Launch Next Year After All” first appeared on MacRumors.com
Discuss this article in our forums
Â
This articles is written by : Nermeen Nabil Khear Abdelmalak
All rights reserved to : USAGOLDMIES . www.usagoldmines.com
You can Enjoy surfing our website categories and read more content in many fields you may like .
Why USAGoldMines ?
USAGoldMines is a comprehensive website offering the latest in financial, crypto, and technical news. With specialized sections for each category, it provides readers with up-to-date market insights, investment trends, and technological advancements, making it a valuable resource for investors and enthusiasts in the fast-paced financial world.